Pressing Instructions

Screen Prints
(White Paper Transfer)
Temp: 325° F
Pressure: Heavy
Time: 7 seconds
Peel: Hot

Screen Prints
(Clear Film)
Temp: 325° F
Pressure: Heavy
Time: 7-12 seconds
Peel: Hot

DTF - Direct To Film
Temp: 320°-350°
Pressure: Heavy
Time: 7-12 seconds
Peel: Cold

UV DTF
(Stickers for glassware)
1. Place UV design facing down.
2. Roll (NOT PEEL) the backing off.
3. The design should be on the clear sticky paper.
4. Place sticky side down on your glassware. 
5. Lightly rub to make sure sticker has attached.
6. Peel clear film.

Aftercare: While UV DTF transfers can survive the dishwasher, hand washing is best for longevity.

SUBLIMATION WRAPS 
Temp: 355°
Pressure: Heavy
Time: 180 seconds
Peel: COLD

Pressed at a firm pressure for 180 seconds (3 minutes) at 180c / 355°F. This can differ and it is always advised to check with the manufacturer or supplier of your sublimation mugs and tumblers first.